Back to this topic again. Is weighing reliable? I've heard concerns about
counting out the right number of pieces for the job before beginning -
another one of those "too operator dependent" complaints, so I like the idea
of weight as an unbiased measurement. But is the weight of the b-stage tight
enough to allow for weighing to be an acceptible counting method?

Thanks,
Matt

Matthew Sanders
PWB Procurement Engineer, Trimble Navigation Limited
[log in to unmask]
Phone: (408) 481-7817
Fax: (408) 481-8590

> -----Original Message-----
> From: Jerome Sallo [SMTP:[log in to unmask]]
> Sent: Saturday, August 29, 1998 9:15 AM
> To:   [log in to unmask]
> Subject:      Re: [TN] Lamination process control
>
> Hi Matt
> The prepreg can be kitted and QC inspected, or even weighed, before it
> gets
> into the layup room. rather than letting the layup people pull it
> themselves
> from a stack.
> And the final boards can be 100% thickness measured after lamination so
> that
> you don't see the ones that are too thin.
>
> ################################################################
> TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
> ################################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
> following text in the body:
> To subscribe:   SUBSCRIBE TechNet <your full name>
> To unsubscribe:   SIGNOFF TechNet
> ################################################################
> Please visit IPC's web site (http://www.ipc.org) "On-Line Services"
> section for additional information.
> For technical support contact Hugo Scaramuzza at [log in to unmask] or
> 847-509-9700 ext.312
> ################################################################

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################