TECHNET Archives

September 1998

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Brad Vanderhoof <[log in to unmask]>
Reply To:
Date:
Wed, 2 Sep 1998 10:29:26 PDT
Content-Type:
text/plain
Parts/Attachments:
text/plain (38 lines)
I have had similar experiences with peelable mask.  The mask will survive
reflow temperatures but not contact with hot metal.  I use edge conveyors
and require a clearance around the edge of the boards to avoid contact with
the chain pins.  I think most of the common masks are incompatible with a
mesh belt.  Could you try a carrier fixture with standoff pins?
Regards and good luck,
Brad Vanderhoof

-----Original Message-----
From:   Lon Weffers [SMTP:[log in to unmask]]
Sent:   Tuesday, September 01, 1998 7:40 AM
To:     [log in to unmask]
Subject:        [TN] Peelable mask in reflow oven

Is there someone who has any experience with peelable mask, (printed on
board by the pcb manufactorer), put on boards which first go through the
reflow oven, then through a solder wave? When they come out of the reflow
oven they stick to the mesh belt. When you take the boards of the belt
there remains some of the peelable mask or worse the mask comes of the pcb.

Regards,

Lon Weffers
Matas Electronics
 << File: ATT00001.htm >>

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################


ATOM RSS1 RSS2