HELLO . CAN SOMEONE TELL ME WHY DO WE GET SO MUCH INK BEING PUSHED INTO THE
HOLES ,ESPECIALLY ON THE CORNERS AND THE BOTTOM 2 INCHES OF THE PANEL ON
THE CIRCUIT AUTOMATION UNIT.
WE WERE TOLD TO MAKE SURE THE SQUEEGES WERE ALIGNED USING THE BLOCKS. THIS
HAS NOT HELPED. I HAVE HEARD MANY PEOPLE HAVE HAD THIS PROBLEM AND
MODIFIED THE UNITS THEMSELVES -CAN THEY SHARE THIS INFO
THANK YOU
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################