TECHNET Archives

September 1998

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Fingers vs Socket & Pin on pwr supply
From:
"Wolfe, Robert" <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Thu, 17 Sep 1998 15:52:22 -0400
Content-Type:
text/plain
Parts/Attachments:
text/plain (26 lines) 
Need info or where to go for info on reliability between gold fingers
and pin&socket edge connectors. I really need a rough % difference of
reliability between the two. I believe there is a vast difference in
cost between the two but is the reliability a vast difference. From own
experience here I believe the difference is not that great. I guess in
enough time corrosion would become a factor and on a per pin basis
pin&socket can carry more current but adding more finger is almost free.
It has been suggested that Werner Englemeyer might be able to help if he
reads this.
Any ones help would greatly be appreciated.
Thanks
Robert M. Wolfe
[log in to unmask]

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################

ATOM RSS1 RSS2