Content-Transfer-Encoding: 7bit



     We audit the output ( the boards.) When it comes down to it, that is
     all that really matters. We also audit for some simple stuff on the
     machine itself, like is the door closed, did they change paste enough,
     etc.


______________________________ Reply Separator _________________________________
Subject: [TN] Process Audit Points [ HELP ]
Author:  [log in to unmask]>  ryu <[log in to unmask] at internet
Date:    9/12/98 8:51 AM


I am working on a project to establish a process audit program for the
SMT line at my company.  I want to know what is the strategy for other
engineers, such as the audit area and it's associated parameters.  I
think for each machine there is  a lot of variables to measure against.
For instant for the stencil printing process, one can measure the
hardness of the squeegee, the speed of the squeegee, the angle of the
squeegee, temperature and the humidity inside the printing area, the
viscosity of the paste, thickness of the stencil....the list can go on
and on......some of these variables may not be a critical issue of the
process.  Collecting  these extra data means spending extra time and
money for nothing.  Therefore I would like to ask the professional in
the fields to help me to define what is important and what is not for a
process audit program.  Thanks.

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text
in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for
additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700
ext.312
################################################################

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################