Subject: | |
From: | |
Reply To: | DesignerCouncil E-Mail Forum. |
Date: | Tue, 15 Sep 1998 09:49:56 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Howdie Alexis:
Sounds like you need series resistive terminations. Do you have access to PSpice? This will help you pin
down the correct values to use at the load through simulation. Also, what layout s/w are you using? PADS
POWERPCB allows you to control impedance with design rules that are passed directly to the Cadence SPECCTRA
route engine?
Good Luck.
Meehan, Alexis wrote:
> I have a data sheet for a part which requires the TD+ and TD- signals to
> be routed as matched length and
> with "a characteristic single-ended impedance of 50 ohms". I understand
> the matched length part, and I
> know how to attain an impedance of 50 ohms on the entire PCB, but what
> do I need to do to insure 50
> ohms impedance on just 4 traces? I'm using 6 mil traces with 6 mil
> spacing.
> Thanks in advance for any advice on this.
>
> **********************************************************
> Alexis Meehan WaveSpan Corporation
> Engineering Services 500 N. Bernardo Avenue
> Tel: 650-237-8365 Mountain View, CA 94043
> Fax: 650-919-0191 http://www.wavespan.com
> ***********************************************************
>
> ################################################################
> DesignerCouncil E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
> ################################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
> To subscribe: SUBSCRIBE DesignerCouncil <your full name>
> To unsubscribe: SIGNOFF DesignerCouncil
> ################################################################
> Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
> For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
> ################################################################
--
Have a Golden Day,
Paul Anderson
[log in to unmask]
http://www.amherst.com/
################################################################
DesignerCouncil E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE DesignerCouncil <your full name>
To unsubscribe: SIGNOFF DesignerCouncil
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################
|
|
|