Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Wed, 23 Sep 1998 08:22:47 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
You or your engineering dept should verify as to if there is something wrong
with the material and than record this as "material passed under deviation"
, if the same can be cleared.
-----Original Message-----
From: PELCHAT_JM [mailto:[log in to unmask]]
Sent: Wednesday, September 23, 1998 7:41 AM
To: [log in to unmask]
Subject: Re: [TN] ESD labels
I did not read anything that REQUIRES the label to
be affixed.
If it is in your supplier contract or on the drawing
as a
requirement, then they have violated that
requirement and should
be written up - BUT, I would write it up as a
Process Indicator
and disposition the material Use-As-Is.
My take,
Jan Pelchat
______________________________ Reply Separator
_________________________________
Subject: [TN] ESD labels
Author: Ian Squires <[log in to unmask]> at
0UTG0ING
Date: 9/23/98 11:14 AM
Guys/Gals/and those Undecided
Our PCB's are normally supplied to us with an ESD
susceptibility symbol label
affixed. Note the word normally, a supplier has sent in a
batch without this
label. QA are now bugging me to reject as a non conformance.
I think this is
uneccessary as the contract doesn't call it up, they though
are insisting that
IPC-A-610rev B (which we ask the subbie to work to) makes
this label a
requirement......i disagree. Anybody want to take my side
(or any QA ers want to
close ranks).
As always thanks in advance
Regards
Ian Squires
Senior Production Engineer
-------------------------------------------------------
Graseby Dynamics Ltd
A Smiths Industries Company
Park Avenue, Bushey, Watford, Herts, WD2 2BW
Web Site: www.gradyn.co.uk
Phone: 01923-228566 xt 295
Fax: 01923-221361
E-mail: [log in to unmask]
Registered in England no. 480992
Registered office:
765 Finchley Road, London, NW11 8DS
-------------------------------------------------------
################################################################
TechNet E-Mail Forum provided as a free service by IPC using
LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask]
with following text
in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line
Services" section for
additional information.
For technical support contact Hugo Scaramuzza at
[log in to unmask] or 847-509-9700
ext.312
################################################################
################################################################
TechNet E-Mail Forum provided as a free service by IPC using
LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask]
with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line
Services" section for additional information.
For technical support contact Hugo Scaramuzza at
[log in to unmask] or 847-509-9700 ext.312
################################################################
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################
|
|
|