At 01:27 PM 9/15/98 -0500, Pat Paulson wrote:
>Gary,
>I asked this same question 6 months ago and most people told me that it was
>the additional spacing that helped, not the guard band itself.

Because it can occur the "most people" can err on a subject, and
particularly because the question has not been framed with sufficient
information, it would be dangerous to rely on some sort of presumed
majority....

But it does appear that there is a consensus on this, based not only in
experience in theory. The short of it is that guard bands work at low
frequencies in high-impedance circuits, and not with high frequencies and
low impedances. And I thank the writer who posted URLs with good
information on this subject....

[log in to unmask]
Abdulrahman Lomax
P.O. Box 423
Sonoma, CA 95476

################################################################
DesignerCouncil E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE DesignerCouncil <your full name>
To unsubscribe:   SIGNOFF DesignerCouncil 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################