Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Thu, 3 Sep 1998 17:47:31 -0700 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Bev, Pat and other TechNet folks,
It was a loaded question.
Unless I'm mistaken there is no industry standard, Not Mil-Std-883, Not
Mil-PRF-38535, Not in EIA, Nor JEDEC that requires components to be clean
when you receive them.
Am I all wet here? Does this seem like a problem to anyone?
Someone please prove me wrong!
-----Original Message-----
From: Bev Christian <[log in to unmask]>
To: 'TechNet E-Mail Forum.' <[log in to unmask]>; 'Russ Winslow'
<[log in to unmask]>
Date: Thursday, September 03, 1998 4:29 AM
Subject: RE: [TN] Ionograph / Cleanliness Requirement for Components
>Russ,
>Excellent question. I, too, would like to know what other companies set
for
>criteria on this, especially no-clean flux users. We require the same
level
>of cleanliness as the industry sets for bare boards, 1 SOD.
>
>regards,
>Bev Christian
>Nortel
>
>> ----------
>> From: Russ Winslow[SMTP:[log in to unmask]]
>> Sent: Wednesday, September 02, 1998 2:31 PM
>> To: [log in to unmask]
>> Subject: [TN] Ionograph / Cleanliness Requirement for Components
>>
>> Do any of you TechNet folks know of a standard cleanliness requirement
for
>> components? By this I mean Ionograph type of test requirements. I've
>> seen
>> them for bare boards and finished assemblies.
>>
>> ################################################################
>> TechNet E-Mail Forum provided as a free service by IPC using LISTSERV
1.8c
>> ################################################################
>> To subscribe/unsubscribe, send a message to [log in to unmask] with
>> following text in the body:
>> To subscribe: SUBSCRIBE TechNet <your full name>
>> To unsubscribe: SIGNOFF TechNet
>> ################################################################
>> Please visit IPC's web site (http://www.ipc.org) "On-Line Services"
>> section for additional information.
>> For technical support contact Hugo Scaramuzza at [log in to unmask] or
>> 847-509-9700 ext.312
>> ################################################################
>>
>
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################
|
|
|