Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Mon, 21 Sep 1998 13:23:56 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Tom,
I am looking at the same things from your customers viewpoint. Looks line
we got one more variable to add to the coupon scripts.
I do not see any acceptance requirements for these lines in 6012. The line
width and spacing requirements are all done visually or using AOI. So if
you over etched the 5 mil coupons lines down to 1.5 mil, I do not see that
the line widths are ever evlauated.
George Franck
Raytheon Systems
Falls Church Virginia
"My Opinions are just that."
----------
From: "Thomas N. Bresnan" <[log in to unmask]>
To: [log in to unmask]
Subject: [TN] FAB: IPC-2221 confusion
Date: Mon, 21 Sep 1998 08:36:44 -0400
TechNetters,
As I received my new copy of 2221, I decide it's time to revamp my
Class 3 standard coupon. Imagine my surprise when I find it's not
"standard" anymore! Maybe I'm missing something or misinterpreting; it
appears to read that coupons must now be representative of the board,
not just for hole size and land area, but also much more detailed. The
coupon is now to include traces in the A & B sections and the holes
are to be aligned to be representative of spacing between holes as
well?
Anybody else read this yet?
Regards,
Tom Bresnan
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section
for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or
847-509-9700 ext.312
################################################################
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################
|
|
|