Jeff,
Below is what I down-loaded from the OrCad web site. Hope this helps.
Thanks,
Greg Kaskey
Senior PCB Designer
IVI Checkmate, Inc.
770.594.6000 x7228
[log in to unmask]
---------------------
PowerPCB netlist and tracedwidth property
Summary:
Capture v7.20 users can now automatically create accurate PowerPCB netlists
that contain the tracewidth property.
More Information:
With this revised netlister, you now have the ability to create valid
PowerPCB netlists from designs that utilize the tracewidth property.
The netlister (pads2kw.dll) is available in .zip compressed file format via
FTP; it is compatible with PADS 2000, as well as PowerPCB.
After downloading and decompressing the .zip file, drag pads2kw.dll to the
\orcadwin\capture\netforms directory on your hard drive, then delete
pads2k.dll (it's in the same directory).
The next time you want to create a PADS 2000 or PowerPCB netlist, choose
Create Netlist from the Tools menu. Select the Other tab in the Create
Netlist dialog box. In the Formatters box you'll see pads2kw.dll presented
as an option. Select pads2kw.dll, adjust other settings as needed, and then
click OK to create a netlist.
----------------------------------------------------------------------------
----
Document number: CAP02068
Applies to: Capture (v.7.20)
Created on: Friday, May 01, 1998
Last modified: Friday, May 01, 1998
-----Original Message-----
From: Cole, Jeff R [mailto:[log in to unmask]]
Sent: Tuesday, September 15, 1998 1:47 PM
To: [log in to unmask]
Subject: [DC] ORCAD EXPRESS/PADS POWER PCB
Does anybody know if there is a problem with the ORCAD Express 7.2 netlist
formatter for Pads Power PCB. I seem to be getting a different netlist every
time I create it. By different I mean there have been know changes to the
schematic, but yet the net list is different every time.
Jeff Cole
Battelle PNNL
Scientific/Engineering Associate
w-(509) 375-2758
fax (509) 372-4725
[log in to unmask]
################################################################
DesignerCouncil E-Mail Forum provided as a free service by IPC using
LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in the body:
To subscribe: SUBSCRIBE DesignerCouncil <your full name>
To unsubscribe: SIGNOFF DesignerCouncil
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section
for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or
847-509-9700 ext.312
################################################################
################################################################
DesignerCouncil E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE DesignerCouncil <your full name>
To unsubscribe: SIGNOFF DesignerCouncil
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################
|
