Sender: |
|
X-To: |
|
Date: |
Wed, 23 Sep 1998 16:51:47 -0400 |
Reply-To: |
|
Subject: |
|
MIME-Version: |
1.0 |
Content-Transfer-Encoding: |
7bit |
Content-Type: |
text/plain; charset=us-ascii |
From: |
|
Parts/Attachments: |
|
|
Ken:
Please explain the purpose of the hp3070 driver files and specify what other miscellaneous reports you
send. A while back we at Amherst Systems unsuccessfully attempted using ACT Technologies CAM350 output for
IPC356 netlists of extremely dense multilayer PCBs. Now, we simply specify that our PCB manufacturer
creates the electrical test fixture and extracts a netlist from the gerber files we send. Alot simpler and
cheaper on our end at least for now. However, now since we have an upgrade to CAM350 we may try generating
the data for electrical test again for ourselves.
Thank You.
Barrett wrote:
> We supply the IPC356 netlist for our board fabricators. For ICT, we
> supply hp3070 driver files along with a number of misc. reports.
> Ken Barrett
> Cisco Systems IBU
>
> ################################################################
> DesignerCouncil E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
> ################################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
> To subscribe: SUBSCRIBE DesignerCouncil <your full name>
> To unsubscribe: SIGNOFF DesignerCouncil
> ################################################################
> Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
> For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
> ################################################################
--
Have a Golden Day,
Paul Anderson
[log in to unmask]
http://www.amherst.com/
################################################################
DesignerCouncil E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE DesignerCouncil <your full name>
To unsubscribe: SIGNOFF DesignerCouncil
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################
|
|
|