Nick,

Try Loctite 444 instant adhesive and accelerator:
- Tak Pak 444
- Tak Pak accelerator 7452

Place a small amount of glue and brush it with the accelerator.  It
will bond instantly.

regards
matthew park
SMT Manufacturing Engineer
NII-Norsat International Inc.

>>> Nick Nicolaides <[log in to unmask]> August 13, 1998  2:36
pm >>>
Hi Tech Netters
Our customer does not have time to write new procedures, so
we are sending
PWBs' with the attached battery hooked up to the PWB. The
battery is not hot
until the PWB is plugged into a mother board. Thus only a small
amount of
leakage is occurring during transit. The wires go through to the
solder side
and cutting them back only protrudes slightly above the board.
The customer
wants these wires protected. The customer will not accept tape.
We are
thinking of some type of adhesive. It must dry fast, be
reworkable, and
readily available. We need to ship like now. what can we do!

################################################################
TechNet E-Mail Forum provided as a free service by IPC using
LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to
[log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line
Services" section for additional information.
For technical support contact Hugo Scaramuzza at
[log in to unmask] or 847-509-9700 ext.312
################################################################

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################