Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Thu, 13 Aug 1998 11:07:51 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Try
www.ampcorp.com
www.itm.com
etc
there is some info on PIP there.
ashok
> ----------
> From: Derek Wynne[SMTP:[log in to unmask]]
> Sent: August 13, 1998 11:09 AM
> To: [log in to unmask]
> Subject: [TN] Intrusion Reflow (was Fine Pitch Pin-In-Hole)
>
>
> Following on from that thought !
>
> Does anybody know a good reference work on intrusion soldering or
> a good source of information/guidelines ?
>
> Any help would be appreciated
>
> Derek J. Wynne
> Design Engineer.
> Toucan Technology Ltd.
> I.D.A. Business Park
> Dangan
> Galway City
> Ireland.
>
> Telephone: +35391519913
> Fax: +35391519901
> E-mail: [log in to unmask] < mailto:[log in to unmask]>
>
>
> > -----Original Message-----
> > From: Ryan Jennens [ mailto:[log in to unmask]]
> > Sent: 13 August 1998 16:38
> > To: [log in to unmask]
> > Subject: [TN] Fine Pitch Pin-In-Hole
> >
> >
> > Mornin all!
> >
> > We are going to attempt a pin-in-hole (intrusive reflow,
> > etc.) trial and
> > I am curious whether we will have more trouble with fine
> > pitch (25 mil)
> > connectors than a larger pitch. Obviously we will have to be more
> > careful,. but does pin-in-hole lend itself to problems with finer
> > pitch? More so than wave soldering? If we are getting two
> > shorts (one
> > on each row of connectors, trailing two pins - need solder thieves
> > designed in, or air knife) per board with waving, will pin-in-hole
> > eliminate these. I guess we will have more trouble getting
> > enough paste
> > into the hole. Let me know if the fine pitch will add headaches.
> > Thanks a lot!
> >
> > Ryan Jennens
> > Phoenix Engineering Design
> >
> > ################################################################
> > TechNet E-Mail Forum provided as a free service by IPC using
> > LISTSERV 1.8c
> > ################################################################
> > To subscribe/unsubscribe, send a message to [log in to unmask]
> > with following text in the body:
> > To subscribe: SUBSCRIBE TechNet <your full name>
> > To unsubscribe: SIGNOFF TechNet
> > ################################################################
> > Please visit IPC's web site ( http://www.ipc.org) "On-Line
> > Services" section for additional information.
> > For technical support contact Hugo Scaramuzza at
> > [log in to unmask] or 847-509-9700 ext.312
> > ################################################################
> >
>
>
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################
|
|
|