Ryan,

We use an Electrovert UPK and OmniFlo 7 and have needed to do some
profiling also. I found that we could use our Datapaq reflow tracker for
the wave machine, too. It worked out great. It now comes with Windows
software.

BTW: If you do use the reflow tracker in the wave, MAKE SURE YOU DON'T FLUX
AND WAVE THE DATAPAQ.




Ryan Chase <[log in to unmask]> on 08/20/98 10:33:02 AM

Please respond to "TechNet E-Mail Forum." <[log in to unmask]>; Please respond
      to Ryan Chase <[log in to unmask]>

To:   [log in to unmask]
cc:    (bcc: Scott Davies/PTI)
Subject:  [TN] Thermal Profilers




Good day,

I am currently searching for a thermal profiler.  We currently have
an Electrovert EPK wave solder and we are just determining which
reflow oven we are going to purchase.  I would like to find the right
combination to profile both of these machines.

My choices are:

Wave Solder Optimizer & Datapaq
Mole & Waverider
Kic profiler

My question is basically, what do other people use?  The functioning
of the unit is basically the same all around but the software is the
important part.  I have used moles in the past and I downloaded the
Kic demo.  Has anyone used the Datapaq profiler?

Do I need a special profiler for the wave?

Any help is appreciated.

Regards,

Ryan Chase
Manufacturing Engineer
GE Harris
403-214-4502
[log in to unmask]

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section
for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or
847-509-9700 ext.312
################################################################

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################