Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Thu, 6 Aug 1998 09:37:05 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Another system is the Bump-It system form Galahad (561-487-0271). It is
a semi-auto vacuum system that uses dedicated tooling for each component
type. The system is about $4500 and tooling about $500 each set.
Mike McMonagle
K*Tec Electronics
(281) 243-5639
> -----Original Message-----
> From: Jim Marsico 516-595-5879 [SMTP:[log in to unmask]]
> Sent: Thursday, August 06, 1998 7:03 AM
> To: [log in to unmask]
> Subject: Re: [TN] BGA Reballing
>
> We're using a simple system from HTI Engineering (508-359-2786) which
> uses a
> two-stencil system. The first stencil is used to manually squeegee
> solder
> paste (or paste flux) onto the component, and the other stencil (with
> larger
> apertures, is used to locate the solder balls. It's not designed for
> high
> volume, it probably takes 3-5 minutes a component. It works well and
> is
> relatively inexpensive, about $5k.
>
> Jim Marsico
> AIL Systems Inc.
> (516) 595-5879
> [log in to unmask]
>
>
> ################################################################
> TechNet E-Mail Forum provided as a free service by IPC using LISTSERV
> 1.8c
> ################################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
> following text in the body:
> To subscribe: SUBSCRIBE TechNet <your full name>
> To unsubscribe: SIGNOFF TechNet
> ################################################################
> Please visit IPC's web site (http://www.ipc.org) "On-Line Services"
> section for additional information.
> For technical support contact Hugo Scaramuzza at [log in to unmask] or
> 847-509-9700 ext.312
> ################################################################
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################
|
|
|