TECHNET Archives

August 1998

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Re: OSP v/s press-fit connectors.
From:
"Crepeau, Phil" <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Tue, 25 Aug 1998 08:58:04 -0700
Content-Type:
text/plain
Parts/Attachments:
text/plain (53 lines) 
hi,

my guess is that it shouldn't be a problem as long as the hole size
meets the design requirements for that press-fit part.  if you haven't
already, you should consult with the connector manufacturer's
application engineers.

phil crepeau

-----Original Message-----
From: Ken Patel [mailto:[log in to unmask]]
Sent: Monday, August 24, 1998 7:02 PM
To: [log in to unmask]
Subject: [TN] OSP v/s press-fit connectors.


Will there be any problem if my board surface finish is OSP and has a
press-fit connector?

Re,
Ken Patel
______________________________________________________
Ken Patel                       Phone:  (408) 490-6804
1708 McCarthy Blvd.             Fax:    (408) 490-6859
Milpitas, CA 95035              Beeper: (888) 769-1808

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV
1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with
following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services"
section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or
847-509-9700 ext.312
################################################################

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################

ATOM RSS1 RSS2