Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Fri, 21 Aug 1998 07:24:18 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Ryan,
We use an Electrovert UPK and OmniFlo 7 and have needed to do some
profiling also. I found that we could use our Datapaq reflow tracker for
the wave machine, too. It worked out great. It now comes with Windows
software.
BTW: If you do use the reflow tracker in the wave, MAKE SURE YOU DON'T FLUX
AND WAVE THE DATAPAQ.
Ryan Chase <[log in to unmask]> on 08/20/98 10:33:02 AM
Please respond to "TechNet E-Mail Forum." <[log in to unmask]>; Please respond
to Ryan Chase <[log in to unmask]>
To: [log in to unmask]
cc: (bcc: Scott Davies/PTI)
Subject: [TN] Thermal Profilers
Good day,
I am currently searching for a thermal profiler. We currently have
an Electrovert EPK wave solder and we are just determining which
reflow oven we are going to purchase. I would like to find the right
combination to profile both of these machines.
My choices are:
Wave Solder Optimizer & Datapaq
Mole & Waverider
Kic profiler
My question is basically, what do other people use? The functioning
of the unit is basically the same all around but the software is the
important part. I have used moles in the past and I downloaded the
Kic demo. Has anyone used the Datapaq profiler?
Do I need a special profiler for the wave?
Any help is appreciated.
Regards,
Ryan Chase
Manufacturing Engineer
GE Harris
403-214-4502
[log in to unmask]
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section
for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or
847-509-9700 ext.312
################################################################
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################
|
|
|