Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Thu, 13 Aug 1998 16:52:25 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Nick Nicolaides said:
...we are sending
>PWBs' with the attached battery hooked up to the PWB.
snip
>The customer
>wants these wires protected. The customer will not accept tape. We are
>thinking of some type of adhesive. It must dry fast, be reworkable, and
>readily available. We need to ship like now. what can we do!
You could apply a thermoplastic "hot melt" adhesive. Fast, removable, etc.
Make sure you store the sticks in a dry location or they will tend to
spatter due to absorbed moisture. One typical problem is a tendency to
"string", but the right technique will limit that problem. Your local Home
Depot has a gun and several types of glue, and they are open till 9 PM -
you can still make FedEx, no problem. Charge them an extra $3 per unit,
send me one. Sounds like a piece of cake to me.
;-) regards,
Jerry Cupples
Interphase Corporation
Dallas, TX USA
http://www.iphase.com
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################
|
|
|