Sender: |
|
X-To: |
|
Date: |
Tue, 18 Aug 1998 16:18:49 -0400 |
Reply-To: |
|
Subject: |
|
From: |
|
Content-Transfer-Encoding: |
7bit |
Content-Type: |
text/plain; charset=us-ascii |
Organization: |
Phoenix Engineering Design, Inc. |
MIME-Version: |
1.0 |
Parts/Attachments: |
|
|
Hey Werner-
I was also told that above 670F that the flux vaporizes, leading to problems with tip tinning. Anybody
heard similar (or dissimilar) information?
Ryan Jennens
Phoenix Engineering
Werner Engelmaier wrote:
> Hi Nick,
> The hotter the soldering iron the faster the soldering operation. Contract
> assemblers get paid by the piece, ergo higher iron temperatures. The down side
> is, that these high manual soldering temperatures put the highest stresses
> into your PTH/PTV interconnect structures and can cause PTH/PTV barrel
> cracking and innerlayer interconnect separations (post separations); I have
> been an expert witness on a number of litigations resulting from this.
> I would recommend specing a lower soldering iron temperature to your contract
> assembler.
>
> Werner Engelmaier
> Engelmaier Associates, L.C.
> Electronic Packaging, Interconnection and Reliability Consulting
> 7 Jasmine Run
> Ormond Beach, FL 32174 USA
> Phone: 904-437-8747, Fax: 904-437-8737
> E-mail: [log in to unmask]
>
> ################################################################
> TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
> ################################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
> To subscribe: SUBSCRIBE TechNet <your full name>
> To unsubscribe: SIGNOFF TechNet
> ################################################################
> Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
> For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
> ################################################################
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################
|
|
|