Hi Leo,

Thanks for the suggestion.  All info given really does help a lot.





----------
> From: [log in to unmask]
> To: [log in to unmask]
> Subject: Re: [TN] Film Stabilization
> Date: Friday, August 07, 1998 9:39 PM
>
> As long as the films are stabilized before, after and during actual use
to the
> same temp. and RH it will not affect the dimensional stability. However,
if
> the use is at higher RH and temp.  the dimensions will change
accordingly.
>
> Suggestion but an expensive one: change from 4 mil to 7 mil PET base.
>
> Leo roos
>
> ################################################################
> TechNet E-Mail Forum provided as a free service by IPC using LISTSERV
1.8c
> ################################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
following text in the body:
> To subscribe:   SUBSCRIBE TechNet <your full name>
> To unsubscribe:   SIGNOFF TechNet
> ################################################################
> Please visit IPC's web site (http://www.ipc.org) "On-Line Services"
section for additional information.
> For technical support contact Hugo Scaramuzza at [log in to unmask] or
847-509-9700 ext.312
> ################################################################

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################