Mime-Version: |
1.0 |
Sender: |
|
Subject: |
|
From: |
|
Date: |
Fri, 28 Aug 1998 19:30:13 -0400 |
Content-Type: |
text/plain |
Reply-To: |
|
Parts/Attachments: |
|
|
Mark,
I don't understand. If you are going to: "break the solder joint of
individual fine pitch leads when it appears to be a poor joint from visual
inspection", how is this not destructive??
regards,
Bev Christian
Nortel
> ----------
> From: Mark Wythes[SMTP:[log in to unmask]]
> Sent: Friday, August 28, 1998 5:14 PM
> To: [log in to unmask]
> Subject: [TN] SMT gull wing solder joint force test?
>
> Are there any standards for testing the solder joint
> mechanical strength for surface mount gull wing lead?
>
> We are wondering if there are any standards and test
> methods for the force required to break the solder joint of
> individual fine pitch leads when it appears to be a poor joint
> from visual inspection. We would like to confirm a poor joint
> through some simple non-destructive test in our receiving
> inspection area when receiving assembled PCB's from our
> board assembly supplier. In other words, this is finished
> product. Our idea was to use a force gauge pushing on the
> side of the lead and measuring force to break the joint. But
> we don't know what is acceptable without a lot of testing. So,
> would this be a valid test of a solder joint, are there
> established methods for a test like this, and are there
> acceptable ranges of force for different types of SMT
> packages?
>
> ################################################################
> TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
> ################################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
> following text in the body:
> To subscribe: SUBSCRIBE TechNet <your full name>
> To unsubscribe: SIGNOFF TechNet
> ################################################################
> Please visit IPC's web site (http://www.ipc.org) "On-Line Services"
> section for additional information.
> For technical support contact Hugo Scaramuzza at [log in to unmask] or
> 847-509-9700 ext.312
> ################################################################
>
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################
|
|
|