TECHNET Archives

July 1998

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
"Stephen R. Gregory" <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Thu, 30 Jul 1998 19:48:32 EDT
Content-Type:
text/plain
Parts/Attachments:
text/plain (46 lines)
In a message dated 98-07-30 19:14:35 EDT, you write:

 [log in to unmask] (Paul Klasek)
 To:    [log in to unmask]

 I concur with David ; have been watching this discussion for some time
 and kept out as I thought perhaps I'm the odd one out in extreme as
 usual ; but since Dave cracked the pot the way it is :
 If the process is out of window to such a degree this kind of machinery
 is needed ; I'd say $ much better spend would be in the process gear ; not
 inspection gear . >>

Hey there Paul!

Well since you and Dave started this, I'm gonna jump on the bandwagon too. I
asked the question that I'm about to ask on another web forum a while back,
and the reponses were kind of guarded...(it was like they didn't want anybody
to see them answer with what some may percieve the wrong response). But my
question was; why does it seem that if you want to do BGA, the consensus is
you need to have xray capability?

I know that xray is a tool that will allow you to see things that you normally
can't see, but is it REALLY necessary? It would seem to me that if you can
make sure that you lay enough paste down, put the part where it's supposed to
go, and got your oven cranked-up with enough heat, you're in the BGA
business...and you can do all that stuff without an xray machine.

"But you can't see the solder joints dross-breath, that's why you need an xray
machine.." some may say. But I didn't see everybody getting spooled-up about
having xray when we started putting decoupling capacitors beneath DRAM years
ago...can't see those solder joints either. So, is it really necessary?

-Steve Gregory-

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################


ATOM RSS1 RSS2