TECHNET Archives

July 1998

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Solder strip dump criteria
From:
"Michael D. Doty" <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Thu, 2 Jul 1998 21:36:20 -0400
Content-Type:
text/plain
Parts/Attachments:
text/plain (27 lines) 
        First I would like to thank those who answered my questions.
     Unfortunately I cleared everything from my in box before I
     replied.(Duh!)
        Anyway a lot of info came in pertaining to peroxide strippers. I'm
     probably one of the few who uses a nitric based stripper in my Tab
     line. The set up is the following. The Nitric stripper removes the
     hasl'd solder. I follow this with a HCl and salt electrolytic strip to
     remove the intermetallic. I don't dump the nitric based stripper. But
     I periodically decant and add back fresh solution.
        The electrolytic strip is the one I need the copper loading on. It
     gets aggresive on copper as the copper content increases. I would like
     to dump this on a more concrete number other than edge count.

        Mike

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################

ATOM RSS1 RSS2