Folks,

I have looked at the IPC RLP 221. The pad size is 2.4mm x 2.4mm.

After reviewing data for a SMB for International Rectifier # 10BQ040
(http://www.irf.com/), and Motorola case 403A-03
(http://www.design-net.com/cgi-bin/my-mot/moto.cgi), the lead sizes
appear to narrow for the IPC RLP 221 footprint.

I think I need a 2mm (Xref) x 2.4mm (Yref) pad. Would this be a
correct decision? Has anyone used these devices, and if so what pad
sizes or footprint do you work to?

Regards,

Colin Weber

---------------------------------------------
Cad/Cam Specialist
Research and Development
Varian Australia P/L
679 Springvale Road, Mulgrave,
Victoria 3170, Australia.Varian OSI

ph +61 3 9566 1409 (Voice Mail)
ph +61 3 9560 7133
Fax +61 3 9560 7950
E-Mail [log in to unmask]
Internet Home Page http://www.osi.varian.com
---------------------------------------------

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################