Valerie Webber
07/10/98 08:46 AM
Scott,

I have the same problem.  A few good websites I have found that describe
characteristic impedance and
differential impedance are

http://www.automata.com/capblity/spectech/z0/z0.htm
http://www.automata.com/capblity/spectech/z0/dz0.htm

Check them out.  They might help.

VW


Date:    Thu, 9 Jul 1998 17:51:48 EDT
From:    [log in to unmask]
Subject: Impedance
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit

Could I please get some feedback as to the definitions and difference
between characteristic versus differential impedance?  I have customers
that ask for both but can't explain what they are actually looking for.
Any help would be appreciated.
Thanks,
Scott

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################