TECHNET Archives

July 1998

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Charles Barker <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Fri, 10 Jul 1998 12:20:31 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (28 lines)
I am getting differing information from different suppliers of PWB's with
regard to solder thickness requirements after HASL. Some say 100 to 500
u-inches, others say 500-800 u-inches and yet others say 1200-3000 u-inches
(.0012" to .003"). We are looking for 6 months to one year of solderability
with storage being in an air-conditioned environment with well less than
saturation humidity in the stockroom. (Generally temp is in the 70 to 75
deg F range, relative humidity 50 percentish +/- 10 percentage points.)

Can some one tell me what the height of the "normal" intermetallics is on a
HASLed SMT pad and how much additional solder coating is needed to prevent
deterioration of the solderability of the pads?

Thanks all,

Charlie B.

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################


ATOM RSS1 RSS2