Subject: | |
From: | |
Reply To: | DesignerCouncil E-Mail Forum. |
Date: | Tue, 7 Jul 1998 08:18:46 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Frank,
Try ALL Flex, Inc. in Northfield, MN. Contact Tara Dunn at (507) 663-7162.
Your width and spacing requirements are no problem.
Dave Roesler
TRI-C Design, Inc.
----------
> From: Frank Frank <[log in to unmask]>
> To: [log in to unmask]
> Subject: [DC] Flex circuits
> Date: Monday, July 06, 1998 10:00 PM
>
> Needs some help on flex circuit design. It has been a long time since my
> last flex circuit, and I am looking for some input to good fabrication
> facilities as well as reasonable spacing and width specs to expect. Any
> input would be appreciated.
>
> In particular, I am looking at a ribbon connector type arrangement
> (straight pin to pin connections) with trace widths in the 8-10 mil range
> and pad clearances as small as .012 mil....... Does this sound like
> something some of you are already doing? I'm looking at a product that
> will run in the 50-100 lot per month quantities.
>
> Thanks in advance for any input.
>
> ################################################################
> DesignerCouncil E-Mail Forum provided as a free service by IPC using
LISTSERV 1.8c
> ################################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
following text in the body:
> To subscribe: SUBSCRIBE DesignerCouncil <your full name>
> To unsubscribe: SIGNOFF DesignerCouncil
> ################################################################
> Please visit IPC's web site (http://www.ipc.org) "On-Line Services"
section for additional information.
> For technical support contact Hugo Scaramuzza at [log in to unmask] or
847-509-9700 ext.312
> ################################################################
>
################################################################
DesignerCouncil E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE DesignerCouncil <your full name>
To unsubscribe: SIGNOFF DesignerCouncil
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################
|
|
|