Dear Technetters,
One of our PCB customers is considering to change his laminate from FR-4
to FR-5 mainly because of
large amount of warp & twist in his multilayered module PCB.
I couldn't believe that FR-5 is more effective than FR-4 in relation to
warp & twist even though some of
FR-5 properties including thermals and mechanicals are dominating.
Any comments or experienced opinion would be appreciated.
Is FR-5 really effective to manufacture "no bowed" multilayer PCB?
T.Y.Kim
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################