Mime-Version: |
1.0 |
Sender: |
|
Subject: |
|
From: |
|
Date: |
Wed, 29 Jul 1998 13:05:30 -0700 |
Content-Type: |
text/plain; charset="us-ascii" |
X-To: |
|
Reply-To: |
|
Parts/Attachments: |
|
|
Dear Eden,
By now you should have received numerous messages warning you about using
conformal coating as a fix to your problem so while I agree with the others
I won't go into details. You have heard the details already and there is no
need to dwell on that.
However, I did want to offer my contact information to you in case you still
have a need to conformally coat your products. My company is a manufacturer
of conformal coat curing system which are sold by Nordson. Because of this
we work closely with coatings manufacturers as well as manufacturers of the
application machinery. I would be happy to discuss the process, equipment
and materials with you if you still feel the need.
Sincerely,
Brian Stumm
> Dear Net member,
>
> We have a hybrid PCB with microBGA and some resistors/capacitors. It
> is a through hole component for data transmitting. When the customer
> insert the component to a PCB and finish the wave soldering. It is
> necessary to clean the board. Due to its application in high
> frequency, the residue of water after cleaning will cause short of the
> circuit.
>
> To solve the problem, we like to try the conformal coating the PCB. Do
> anyone can recommend the conformal material and the process?
>
>
> Eden
>
>################################################################
>TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
>################################################################
>To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in the body:
>To subscribe: SUBSCRIBE TechNet <your full name>
>To unsubscribe: SIGNOFF TechNet
>################################################################
>Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section
for additional information.
>For technical support contact Hugo Scaramuzza at [log in to unmask] or
847-509-9700 ext.312
>################################################################
>
>
>
ETS, LLC - West ETS, Inc. - East
3939 N. Freya St. PO Box 47887
Spokane, WA 99207 Plymouth, MN 55447
509-483-0900 (voice) 612-553-0051 (voice)
509-483-0331 (fax) 612-553-0246 (fax)
[log in to unmask] [log in to unmask]
Benefit from a direct relationship with the manufacturer!
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################
|
|
|