Hello everyone out there,

I would be interested to know what kind of in-line inspection equipment you
use (AOI, Laser, etc.) and where (post-print, post-placement, post-reflow
etc.) and what is your experience of the benefits - defect reduction,
better process control etc. Furthemore I would be interested to hear if you
have linked this inspection equipment to SPC software and what are the
variables you measure for your process control.

Please send your responses via email straight to me to the following
address:

[log in to unmask]

Thanks for your input!

Juha Uski

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################