If you have PADS PowerPCB, I can send a file to you. Let me know what
version. If not, I will get a text file out to you somehow. Would DXF be
possible?

>----------
>From:  Frank Frank[SMTP:[log in to unmask]]
>Sent:  Tuesday, July 07, 1998 11:44 AM
>To:    [log in to unmask]
>Subject:       Re: [DC] Flex circuits
>
>At 08:42 AM 7/7/98 -0400, you wrote:
>>Greetings Frank,
>
>Chris,  Great help and good contacts.  Just what I needed.  I am not
>looking at the ZIF connectors, rather a small SMT connector that is
>normally used on rigid boards for a special computer application.  I spoke
>with Paul Kopnick (Larry is no longer with them) at All Flex earlier today.
> He commented that your notes etc. were about the best they recieved in,
>and said if I wanted a good starting spot on the correct material callouts
>etc. that I should contact you.....  I was attempting to get a "template"
>from him on the typical areas he needed to have specified.  So whats the
>chance I could get a set of notes from you on one of your flex boards.
>
>################################################################
>DesignerCouncil E-Mail Forum provided as a free service by IPC using LISTSERV
>1.8c
>################################################################
>To subscribe/unsubscribe, send a message to [log in to unmask] with following
>text in the body:
>To subscribe:   SUBSCRIBE DesignerCouncil <your full name>
>To unsubscribe:   SIGNOFF DesignerCouncil
>################################################################
>Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section
>for additional information.
>For technical support contact Hugo Scaramuzza at [log in to unmask] or
>847-509-9700 ext.312
>################################################################
>
>

################################################################
DesignerCouncil E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE DesignerCouncil <your full name>
To unsubscribe:   SIGNOFF DesignerCouncil 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################