>
> Guess it depends on the size of your symbols. We do C's and D's, but the
> symbols and text are big enough to be clearly read when reduced to A's and
> B's on a copy machine. Go figger.
>

At the last company I worked for, we had the same problem. The engineers, techs,
and everyone who actually used the drawings, liked the convenience of B size
drawings. Management and QA insisted on D size. What we did was to create D size
drawings with symbols large enough to be seen clearly when reduced to B size. We
filed away the D size as the archive copy, but printed them B size for anyone
actually using the drawings. If you would like to adopt this system, check your
CAD system, most will allow you to scale library parts, so that you don't need
to re-create them all.

################################################################
DesignerCouncil E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE DesignerCouncil <your full name>
To unsubscribe:   SIGNOFF DesignerCouncil 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################