Frank,

Try ALL Flex, Inc. in Northfield, MN.  Contact Tara Dunn at (507) 663-7162.
 Your width and spacing requirements are no problem.

Dave Roesler
TRI-C Design, Inc.


----------
> From: Frank Frank <[log in to unmask]>
> To: [log in to unmask]
> Subject: [DC] Flex circuits
> Date: Monday, July 06, 1998 10:00 PM
>
> Needs some help on flex circuit design.  It has been a long time since my
> last flex circuit, and I am looking for some input to good fabrication
> facilities as well as reasonable spacing and width specs to expect.  Any
> input would be appreciated.
>
> In particular, I am looking at a ribbon connector type arrangement
> (straight pin to pin connections) with trace widths in the 8-10 mil range
> and pad clearances as small as .012 mil.......   Does this sound like
> something some of you are already doing?  I'm looking at a product that
> will run in the 50-100 lot per month quantities.
>
> Thanks in advance for any input.
>
> ################################################################
> DesignerCouncil E-Mail Forum provided as a free service by IPC using
LISTSERV 1.8c
> ################################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
following text in the body:
> To subscribe:   SUBSCRIBE DesignerCouncil <your full name>
> To unsubscribe:   SIGNOFF DesignerCouncil
> ################################################################
> Please visit IPC's web site (http://www.ipc.org) "On-Line Services"
section for additional information.
> For technical support contact Hugo Scaramuzza at [log in to unmask] or
847-509-9700 ext.312
> ################################################################
>

################################################################
DesignerCouncil E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE DesignerCouncil <your full name>
To unsubscribe:   SIGNOFF DesignerCouncil 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################