Hi Steven,

Unless you want to generate Your own bath, which I would not recommend, you can
purchase proprietary baths from a number of sources.
You might try IMS and contact Frank Nuzzi or Kevin Dempsy at (302)456-0850.
Also McDermid makes a bath. Their Number is (203)575-5700. A good contact there
is Joe D'Ambrisi.
Other suppliers include Ato-Tech, Hunt chemicals, and Shipley. You can look up
these references I hope.

Good Luck,
Les Connally
[log in to unmask]

G
>  From: "Steven R. Page" <[log in to unmask]>, on 6/1/98 11:52 AM:
>  Hello and good day,
>          I am in need of the formula used in electroless plating. I was
>  hoping you
>  could help me. I have been searching the net for over two weeks now with no
>  luck. I know someone out there has this information. I just don't know
>  where to look obviously. :-)
>  I will be waiting for your reply.
>                  Sincerely,
>                          Cathie Smith
>
>

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################