TECHNET Archives

June 1998

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Chris Williams <[log in to unmask]>
Reply To:
Date:
Mon, 22 Jun 1998 13:07:20 -0400
Content-Type:
text/plain
Parts/Attachments:
text/plain (32 lines)
Make sure you are using good entry material (preferably aluminum).

Rout Lead wrote:

> SOME POSSIBLE CAUSES ARE  SPINDLE RPM AND IN FEEDS, ALSO YOUR PANEL
> STACK HEIGHT.THESE ARE THE THREE FACTORS THAT  YOU NEED TO LOOK AT WHEN
> USING A SMALL DRILL BIT LIKE AN .0240   IF YOU ARE DRILLING THREE DEEP
> TRY USING A SLOWER FEED RATE AND A HIGHER RPM.
>
> ################################################################
> TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
> ################################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
> To subscribe:   SUBSCRIBE TechNet <your full name>
> To unsubscribe:   SIGNOFF TechNet
> ################################################################
> Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
> For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
> ################################################################

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################


ATOM RSS1 RSS2