TECHNET Archives

June 1998

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Re: Tape residue elimination
From:
SMITH RUSSELL MSM PO US <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Sat, 13 Jun 1998 17:46:00 +0200
Content-Type:
text/plain
Parts/Attachments:
text/plain (47 lines) 
You might try peelable solder mask products, there are several around I
recall one called wonder mask that was a latex based product and there
is a Lackwerk peters product that works quite well.
with regard to tape there are several 3m tapes with high temp adhesive
on them , I believe you will have better luck with the  polyimide based
film tapes.
 ----------
From: Duane Briggs
To: [log in to unmask]
Subject: [TN] Tape residue elimination
Date: Monday, June 01, 1998 8:29PM

Gold fingers have to be covered during flow soldering.  Is there any
tape
that does NOT leave ANY residue?  If not, what is the best, cheapest way
of
removing the residue?  Pallets are not an option for us unfortunately.

Duane

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV
1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with
following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for
additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or
847-509-9700 ext.312
################################################################

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################

ATOM RSS1 RSS2