Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Wed, 10 Jun 1998 08:26:53 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hi,
I have been in the field of ICT and FT testing for more than 5 years.
May be I can help you.
As far as costs of ICT goes it varies from vendor to vendor eg. a good
configuration of GR2287e would cost you somewhere around 200 to 300
thousand dollars , however Teradyne would cost lesser, HP stuff would
be more costlier.
I had made a good comparison of these three ICTs, you may want to have
a look at it .
The FT is something different case. Normally it depends upon the
assembly . However HP offers a functional testers which can be
attached to their ICT (I never tested them , though) . You can also
build FTs using HP-VXI technology .
Most of the time FTs are supplied by the customers , I would use a
hotmock-up station if it is not.
The probe cost varies on two factors: vendor and type of probes, eg.
75mil , 8Oz probe from TTI would be somewhere around 90 cents to 1.2
dollors per probe (Don't forget you will replace the probes typically
after 30000 actuations , that's a practical approach although
manufactrers recommned change after 0.5 million actuations).
Let me know if you need any further details on this.
-----Original Message-----
From: LI YUAN [SMTP:[log in to unmask]]
Sent: Tuesday, June 09, 1998 4:59 PM
To: [log in to unmask]
Subject: [TN] ICT and FT testers
Hello, could anyone provide information on price of testers including
fixture and probes? I just need an estimate. Appreciate your help.
Thanks,
Yuan
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV
1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with
following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for
additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or
847-509-9700 ext.312
################################################################
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################
|
|
|