Jerry,
I cannot help with the camera but I certainly recommend talking to Vision
Engineering.
These guys have a great system called Cobra which we together linked to a
camera of "their" supply to monitor and photograph dendrites as they formed.
Might do the trick?
Sorry I don't know their e-mail info but try faxing Mark Curtis, Sales
Director, Vision Engineering at +44 1483 248317 or by phone: +44 1483 248300
Hope it helps,
Regards, Graham Naisbitt
__________________________________________________________________________
[log in to unmask]
Concoat Ltd
Alasan House, Albany Park
Camberley GU15 2PL UK http://www.concoat.co.uk
-----Original Message-----
From: Jerry Cupples <[log in to unmask]>
To: [log in to unmask] <[log in to unmask]>
Date: 09 June 1998 21:51
Subject: [TN] ASSY: Video camera for digitized image capture
>Hello out there in cybertechland,
>
>We have a high mix captive OEM assembly operation, probably build about 1
>kits weekly of 50-500 pcs. A problem is the verification of SMT machine
>setup on first article.
>
>We have many population option variants, so the boards have RAM sites, etc.
>which are either populated or not based on configuration.
>
>When the first board is off the P&P machine, we typically give it a 5
>minute visual check against a "checkpaper" drawing which is marked with
>many cute color codes to indicate the proper component locations, along
>with hand written markings to show the component brand and value.
>
>I have a goal to make this all based on video or digital images. I am
>looking for a suitable CCD video camera which can resolve image details and
>produce an image about 2X normal size on a monitor to be installed right on
>the SMT line. If we do video captures on each board, we could then compare
>to the image on the monitor.
>
>We have tried cheap digital cameras (not enough resolution) and our CCD
>video camera has good resolution, but the max image size on the zoom lens
>we have is about one inch.
>
>If you have been down this road, suggestions would be welcome.
>
>
>regards,
>
>
>
>
>Jerry Cupples
>Interphase Corporation
>Dallas, TX USA
>http://www.iphase.com
>
>################################################################
>TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
>################################################################
>To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in the body:
>To subscribe: SUBSCRIBE TechNet <your full name>
>To unsubscribe: SIGNOFF TechNet
>################################################################
>Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional
information.
>For technical support contact Hugo Scaramuzza at [log in to unmask] or
847-509-9700 ext.312
>################################################################
>
>
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################
|
