Subject: | |
From: | |
Reply To: | |
Date: | Tue, 9 Jun 1998 15:50:03 +0200 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Kathy:
Maybe you could check out the Philips TriScan machine, launched at
Productronica last year. If I am correct (I am not using the machine nor
referencing the supplier) they are doing a 3D laser scan of the board,
after which the solder paste volume is calculated for each and every
pad. It takes about 20 sec. for a medium sized board, and the machine is
not extremely expensive.
Good luck !
Peter Willaert
Agfa-Gevaert N.V.
Kathy Palumbo wrote:
>
> Currently our QA department is pushing for the Malcom Solder paste Height
> Measurement system(about $34K). This system is only capable of measuring
> solder paste height.
>
> Are there other paste inspection systems or AOI systems available so that we
> can compare.
>
> A system that is capable of inspecting solder paste height as well as doing
> OCR on component part numbers would be ideal. If we could download the
> inspection data into an SPC system that would be great too. A system that
> could accept gerber files for programming purposes would be even nicer.
>
> Any information on a system or systems like those mentioned above will be
> greatly appreciated!! Thanks in advance for your help.
>
> Thanks,
> Kathy Palumbo
>
> ################################################################
> TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
> ################################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
> To subscribe: SUBSCRIBE TechNet <your full name>
> To unsubscribe: SIGNOFF TechNet
> ################################################################
> Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
> For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
> ################################################################
--
---------------------------------------------------------------
- What do you see ? ==== A G F A ==== The complete picture -
- -
- Peter Willaert -
R&D Equipment
Engineering Group Manager
Agfa-Gevaert N.V. tel. +32 3 444 6267
Septestraat 27 fax +32 3 455 4517
B-2640 Mortsel [log in to unmask]
---------------------------------------------------------------
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################
|
|
|