************************************************************************
* This message was originated by automatic IPC Chat Session
* Request Page (http://jefry.ipc.org/IPCchat/IPCchat_request.html)
************************************************************************
Jimmy Boyd ([log in to unmask]) announces a Chat session with topic
"Solder Mask Cure Testing and IPC-TM-650".
The Chat session will be held on 06/04/98, at 12:30 P.M. EDT
(Please note the time zone - it might be different from yours)
Jimmy Boyd's comments:
What is the most viable way to test LPI or epoxy
type solder masks? Is methelyne chloride still an
option? What section of IPC-TM-650 covers this
testing and what results can be expected?
Thanks
Jimmy Boyd
*** IPC Chat Room rules and recommendations ***
- IPC Chat Room can be accessed at http://jefry.ipc.org/IPCchat/IPCchat.html or
through the "IPC On-Line Services" link from IPC's homepage at http://www.ipc.org.
- You can announce your chat session using the form on the IPC Chat Page
under the link "Announce your own chat session".
- For time conversion use the link on the IPC Chat Page or visit
http://poisson.ecse.rpi.edu/cgi-bin/tzconvert
- Please remember: this service is not for private use; topics of conversation
should be kept relevant to the electronic interconnection industry. Also,
since IPC Chat is open to everyone, please be aware that any information you
provide about yourself will be available to every forum's participant.
If you have any questions or suggestions please contact Dmitriy Sklyar at
[log in to unmask] (tel: 874-509-9700 ext. 311).
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################