Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Tue, 9 Jun 1998 09:09:40 -0700 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Dear Cory,
We are the manufacturer of the Nordson Conformal Coat curing ovens
(typically sold with the Nordson Select Coat line) which are also offered
under our name, ETS. I would be happy to propose one of our curing ovens for
your project. Perhaps you could provide me with your phone number or give me
a call. I would like to know more about the size of your boards and the
time/temp relationship recommended for tack free cure.
Sincerely,
Brian Stumm
ETS, LLC
3939 N. Freya St.
Spokane, WA 99207
509-483-0900 (voice)
509-483-0331 (fax)
[log in to unmask] (e-mail)
>We are using a manual DIP conformal coating method with an acrylic coating
>and building assemblies to the IPC-610 specification.
>
>1. Are there other specifications which apply to conformal coating? 610
>is brief on the subject.
>
>2. Our biggest defect is bubbles in the coating. We are finding that dip
>angle, insertion rate and extraction rates all effect the amount of bubbles
>on the finished assembly. Does anyone have similar experience or advice?
>
>3. Does anyone know of available dipping equipment and / or drying
>equipment? Our goal is to be able to dip 250 assemblies per day (1000
>assemblies per day panelized 4 up).
>
>Thank You
>
>Cory Steeby
>
>################################################################
>TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
>################################################################
>To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in the body:
>To subscribe: SUBSCRIBE TechNet <your full name>
>To unsubscribe: SIGNOFF TechNet
>################################################################
>Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional
information.
>For technical support contact Hugo Scaramuzza at [log in to unmask] or
847-509-9700 ext.312
>################################################################
>
>
>
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################
|
|
|