Content-Type: |
text/plain |
Sender: |
|
Subject: |
|
From: |
|
Date: |
Thu, 25 Jun 1998 16:47:42 -0500 |
MIME-Version: |
1.0 |
X-To: |
|
Reply-To: |
|
Parts/Attachments: |
|
|
Scott,
Don't know board finish, have to check with vendor. What's up
with Entek that I should know, you tease....
> -----Original Message-----
> From: Scott Martin [SMTP:[log in to unmask]]
> Sent: Thursday, June 25, 1998 4:38 PM
> To: [log in to unmask]
> Subject: Re: [TN] Poor Solderability on TSOPs
>
> Board finish? Let me guess.... Entek?
>
> -----Original Message-----
> From: McMonagle, Michael R. [mailto:[log in to unmask]]
> Sent: Thursday,June 25,1998 3:30 PM
> To: [log in to unmask]
> Subject: [TN] Poor Solderability on TSOPs
>
>
> I am looking for a little enlightenment with an issue that we have
> been
> seeing. We have SMT assemblies with poor solderability on TSOP and
> mini-QFP type devices. The solder appears to have incomplete reflow
> and/or grainyness to the joints. Everything else on the board such as
> chips, j-leads and standard QFPs look good, shiny and well wetted. We
> are using fresh aqueous paste (Alpha WS609) and a fairly standard
> profile. Is there some inverse relationship between component/lead
> mass
> and thermal absorption that I am missing here? Any inputs would be
> greatly appreciated.
>
> Mike McMonagle
> Process Engineering Supervisor
> K*Tec Electronics
>
> Mike McMonagle
> PCA Process Engineering Supervisor
> K*Tec Electronics
> 1111 Gillingham Lane
> Sugar Land, TX 77478
> 281-243-5639 Phone
> 281-527-1726 Pager
> 281-243-5539 Fax
>
> ################################################################
> TechNet E-Mail Forum provided as a free service by IPC using LISTSERV
> 1.8c
> ################################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
> following text in the body:
> To subscribe: SUBSCRIBE TechNet <your full name>
> To unsubscribe: SIGNOFF TechNet
> ################################################################
> Please visit IPC web site (http://jefry.ipc.org/forum.htm) for
> additional information.
> For technical support contact Hugo Scaramuzza at [log in to unmask] or
> 847-509-9700 ext.312
> ################################################################
>
> ################################################################
> TechNet E-Mail Forum provided as a free service by IPC using LISTSERV
> 1.8c
> ################################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
> following text in the body:
> To subscribe: SUBSCRIBE TechNet <your full name>
> To unsubscribe: SIGNOFF TechNet
> ################################################################
> Please visit IPC web site (http://jefry.ipc.org/forum.htm) for
> additional information.
> For technical support contact Hugo Scaramuzza at [log in to unmask] or
> 847-509-9700 ext.312
> ################################################################
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################
|
|
|