Content-Type: |
text/plain |
Sender: |
|
Subject: |
|
From: |
|
Date: |
Thu, 25 Jun 1998 11:29:12 -0400 |
MIME-Version: |
1.0 |
X-To: |
|
Reply-To: |
|
Parts/Attachments: |
|
|
FYI all, Bev Christian is a HE, not a SHE.
> -----Original Message-----
> From: [log in to unmask] [SMTP:[log in to unmask]]
> Sent: Wednesday, June 24, 1998 7:01 PM
> To: [log in to unmask]
> Subject: [TN] ASSY: BGA sanity check
>
> Regarding populating both sides of the board with BGAs, I think Bev
> Christian
> summed it up pretty well. If you meet the parameters she mentioned, you
> should be fine with most PBGAs. The formula I use for calculating what
> will
> stay in place when re-reflowed is the sum of the lead (or collapsed
> sphere)
> surface area (all interconnects on the device) divided by the weight of
> the
> component in grams. If it comes out to less than 30 grams/ sq in, the
> component will stay on as there is ample surface tension. (Note, most
> ceramic
> BGAs or CGAs exceed this ratio).
>
> You sure don't need "differential heating" and you can do it on ANY reflow
> oven (not just an ETS whoopee-flow or whatever) that, as Bev mentioned,
> has a
> smooth running, edge conveyor
> HOWEVER........
> As Jerry Cupples wisely insinuates - beware when you do populate both
> sides
> with these. Remember to allow room for removal and replacement (Design
> for
> Repairability 101) ! We don't live in a perfect world, you know.
>
> ################################################################
> TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
> ################################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
> following text in the body:
> To subscribe: SUBSCRIBE TechNet <your full name>
> To unsubscribe: SIGNOFF TechNet
> ################################################################
> Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional
> information.
> For technical support contact Hugo Scaramuzza at [log in to unmask] or
> 847-509-9700 ext.312
> ################################################################
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################
|
|
|