Are you really looking for a solder resist that will adhere to the molten
metal surface?  I would not recommend solder resist over a meltable surface.
Try SMOBC.
                              Al Cash
> ----------
> From:         Byrns Nancy[SMTP:[log in to unmask]]
> Reply To:     TechNet E-Mail Forum.;Byrns Nancy
> Sent:         Wednesday, May 06, 1998 8:43 AM
> To:   [log in to unmask]
> Subject:      [TN] IPC-D-275 conductor width .100"
>
> Hi everybody
>
> We have Rigid Printed Board, class 3 for military we need to do.
> We refer to IPC-D-275 paragraph 5.5.1 solder resist coating because we
> have a conductor width 0.100" and the coating completely cover this
> conductor.
> We want to know which pattern we should use to have a good solder resist
> coating adhesion to the melting metal surface??
> Which pattern are normally use in production for those conductor width??
>
> Thanks you,
> Nancy Byrns
> Oerlikon Aerospace
>
> ################################################################
> TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
> ################################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
> following text in the body:
> To subscribe:   SUBSCRIBE TechNet <your full name>
> To unsubscribe:   SIGNOFF TechNet
> ################################################################
> Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional
> information.
> For the technical support contact Dmitriy Sklyar at [log in to unmask] or
> 847-509-9700 ext.311
> ################################################################
>

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################