Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Fri, 29 May 1998 13:54:51 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
A long time ago - like about 1980, I used a copper tape with conductive
adhesive to create plating thieves in vast expanses of photoresist that had
been sparsely populated with isolated holes and pads. If well applied, the
tape adhesive would stand up to the plating chemistry and preplate
solutions. I do not remember the product name but it came from 3M. We ( I
was with Sperry Univac Defense Systems back then) used a hand cranked
clothes ringer to squeeze the tape but Western Magnum has more advanced
ways to apply mechanical pressure to the tape. I have found a couple of
rolls of similar tape here (at GE Fanuc) but I'm not sure if it has a
conductive adhesive. It is 3M Electrical tape and the bag says Tape No.
1181. Good luck!
George Carroll, Process Chemist
GE Fanuc Automation
[log in to unmask]
-----Original Message-----
From: Paul Wilson [SMTP:[log in to unmask]]
Sent: Friday, May 29, 1998 9:37 AM
To: [log in to unmask]
Subject: [TN] source of adhesive coper foil
Technet:
Does anyone have a list of manufacturer's of adhesive copper tape
capable of withstanding plating conditions?
Thank you,
Paul Wilson
Plant Chemist
Circuit Center, Inc.
937-435-2131
################################################################
TechNet E-Mail Forum provided as a free service by IPC using
LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with
following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for
additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or
847-509-9700 ext.312
################################################################
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################
|
|
|