TECHNET Archives

May 1998

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Re: Removing Air From Solder Paste
From:
Paul Klasek <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Fri, 22 May 1998 08:33:24 +1000
Content-Type:
text/plain
Parts/Attachments:
text/plain (53 lines) 
Hi Lyn

Appreciate the shot but the metal and flux separation would be
inevitable .
Still, good point to file for other applications .

Paul Klasek
ResMed

>----------
>From:  Lynch, Lyn[SMTP:[log in to unmask]]
>Sent:  Friday, 22 May 1998 2:29
>To:    [log in to unmask]
>Subject:       [TN] Removing Air From Solder Paste
>
>     In another life, I used a centrifuge to remove air from thick
>     epoxies. Should work nicely with solder paste. Be sure the end is
>     well sealed, otherwise, you'll have a full centrifuge and empty
>     syringes.
>
>     The views stated above are not necessarily those of my employer.
>
>     Lyn R. Lynch
>     Coates ASI
>
>################################################################
>TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
>################################################################
>To subscribe/unsubscribe, send a message to [log in to unmask] with following
>text in the body:
>To subscribe:   SUBSCRIBE TechNet <your full name>
>To unsubscribe:   SIGNOFF TechNet
>################################################################
>Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional
>information.
>For technical support contact Hugo Scaramuzza at [log in to unmask] or
>847-509-9700 ext.312
>################################################################
>
>

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################

ATOM RSS1 RSS2