Hi technetters,
I have a problem at wave solder with spikes on a BNC connector.
The spikes are on the ground pins which are 1.6mm diameter protruding 1.4
mm with a flat surface. The land diameter is only.4mm which may be causing
a problem..
we use turbulent to heat the part to some effect but does not clear the
problem entirely.
any clues
Rgds
Donal o Brien
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################