Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Fri, 8 May 1998 14:44:34 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Richard-
Try contacting Joe Jaroz at Faldering Design in Hamden, CT USA. They
developed a method of photoplotting onto 3 dimensional film which could
then be placed over a copper plated substrate and then put through the
normal photo etching process. For example, they were making the housing
of a cell phone into the PCB.
Their phone number is (203) 281-4108. Tell him Charles from BICOM sent
you.
Charles Wills
BICOM, Inc.
[log in to unmask]
On Fri, 8 May 1998 23:28:46 +0800 Richard Linn <[log in to unmask]>
writes:
>I have recently seen an industrial process that people weld (similar
>to
>brazing) many small pieces of copper wire on the curvature surface
>(copper)
>such as vase, to develop an artwork (art piece). I thought that it
>can be
>produced much faster and more accurately with the photolithography
>process
>we use in PCB, Wafer Fab, LCD, etc. with plating or etching.
>However, our
>applications are targeted mainly for planar surface!
>Do any of you out there know some photolithography process or
>equipment
>which is to transfer arkwork on to a curvature surface?
>Any idea or information you can help me? Thank you in advance!
>
>
>Richard J. Linn, Ph.D.
>Department of Industrial Engineering and Engineering Management
>The Hong Kong University of Science and Technology
>Clear Water Bay, Kowloon, Hong Kong
>Tel: (852) 2358-7096
>Fax: (852) 2358-0062
>E-mail: [log in to unmask]
>Web: http://iesu5.ust.hk/dfaculty/linn/
>
>################################################################
>TechNet E-Mail Forum provided as a free service by IPC using LISTSERV
>1.8c
>################################################################
>To subscribe/unsubscribe, send a message to [log in to unmask] with
>following text in the body:
>To subscribe: SUBSCRIBE TechNet <your full name>
>To unsubscribe: SIGNOFF TechNet
>################################################################
>Please visit IPC web site (http://jefry.ipc.org/forum.htm) for
>additional information.
>For the technical support contact Dmitriy Sklyar at [log in to unmask] or
>847-509-9700 ext.311
>################################################################
>
>
_____________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com
Or call Juno at (800) 654-JUNO [654-5866]
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################
|
|
|