TECHNET Archives

May 1998

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Re: Solder Fracture Problems
From:
"<Jason M. Smith>" <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Wed, 6 May 1998 17:01:14 -0400
Content-Type:
text/plain
Parts/Attachments:
text/plain (22 lines) 
On boards that are .060, use a center board support that will support the
board over the wave.  Loosen your conveyor fingers to allow for the
expansion of the PWB usually helps me.  you have to allow for this
expansion in your fingers.  The board is going to expand
regardless.....just a matter if you will allow for it or it will do it's
own thing.

Jason Smith
Lexmark Electronics

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################

ATOM RSS1 RSS2